Forklift Tyres for Factories and Manufacturing Plants

Forklift tyres for factories have to cope with more than a warehouse truck does. Heat from furnaces, steel swarf on the floor, oil and chemical spills, static build-up and food hygiene rules all change which tyre will last. A solid resilient tyre is the usual starting point for a plant where trucks cross between the shop floor and the yard, and special compounds cover heat, static and clean-floor needs.


Fork N Tire, based in Pinetown, supplies manufacturers across Durban, the Midlands and the wider KwaZulu-Natal industrial belt. Below is how we help a factory choose, by hazard rather than by product category.


What tyres do factory forklifts need?


Start with what's on the floor. A factory forklift usually works in one of five conditions, and each calls for a different tyre or compound:

Factory condition

What goes wrong

Tyre approach

Steel swarf, offcuts, metal chips

Cuts and embedded fragments

Solid tyre with a cut-resistant compound, floor sweeping routine

Heat from furnaces or ovens

Compound hardens, cracks, wears early

Heat-resistant compound, load and speed control

Oil, solvents and chemical spills

Rubber swells, softens, peels

Compound chosen for the chemical present

Flammable atmospheres or sensitive electronics

Static discharge

Conductive or anti-static tyres

Food, pharma and packaging

Floor marking, hygiene audits

Plenty of plants face more than one of these. A steel fabricator has swarf and heat. A food plant has spills and marking. Describe the real conditions to us and we'll narrow the choice.

Which tyre suits a factory that crosses between the shop floor and the yard?

A solid resilient tyre

A solid resilient tyre in most cases. It can't puncture, which matters when there's scrap, offcuts or broken pallets around, and it's built for the mix of smooth concrete and rougher yard surface that most plants have.

Cushion tyres

Cushion tyres suit trucks that stay indoors on smooth floors. If a cushion tyre keeps chunking on one of your trucks, the truck is probably spending more time on the yard than you think.

Pneumatic tyres

Pneumatic tyres belong on trucks that work mainly outside, such as a diesel truck loading timber or castings in a yard. Foam-filled versions remove the puncture risk, which suits a site with a lot of sharp scrap.

What are conductive forklift tyres and when do you need them?

Conductive tyres, also called anti-static tyres, contain a compound that allows static electricity to drain from the truck to the floor instead of building up on it. Standard forklift tyres aren't designed to do that reliably.

You'd look at them in places where a spark would be a problem: areas handling flammable liquids, gases or dust, and rooms with sensitive electronic components. Whether your site needs them isn't a tyre supplier's call. It's usually a decision for your safety officer, based on your site's hazardous area classification and any insurer or customer requirements.

What we can do is supply the tyre once you know the specification. Tell us what the safety officer needs and we'll check what's available for your truck. Ask early, because specialist compounds aren't always sitting on the shelf.

Can forklift tyres handle heat in a foundry or hot process plant?


Standard tyres struggle. Heat hardens the rubber, which then cracks and chunks, and a solid tyre running hot also builds up internal heat that works against it. Heat-resistant compounds and good operating habits can help: don't overload, don't exceed the truck's rated speed and give trucks a rest between very long cycles.

If you've seen tyres with a glazed surface, a burnt look or rubber crumbling at the edges, heat is almost certainly the cause. Send us photos. We'll tell you whether it's heat or ordinary wear and what options exist.

GET IN TOUCH

Which tyres cope with oil, chemicals and cleaning agents?

Rubber compounds react differently to different chemicals. Some oils make rubber swell and soften. Some solvents attack it. Cleaning agents used in food plants can degrade certain compounds over time.

Tell us exactly what's on your floor, including product names or safety data sheets if you have them. We'll check the compound against the supplier's data and tell you what we find. If the tyre keeps failing early, don't assume it's a poor tyre. It may be the wrong compound for the spill.

Do food factories need non-marking tyres?


Often, yes. Non-marking tyres are made without carbon black, so they don't leave dark streaks on light floors. Many food, beverage, packaging and pharmaceutical sites specify them for the sake of floor appearance and audits. They suit clean, smooth, lighter-duty floors, and they're generally less hard-wearing than standard tyres, so expect to replace them a bit sooner if the work is heavy.

Our guide to non-marking forklift tyres in South Africa goes into the detail.

How do you keep factory tyres lasting longer?


A few habits do most of the work:

Sweep the routes regularly, especially where swarf, offcuts or glass collect

Match the tyre to the truck's duty, not to the cheapest option on the shelf

Keep trucks within their rated load and speed

Fix surface damage on the route, not just the tyre it eventually destroys

Record hours on each tyre set so you can see patterns

See our forklift tyre repair and maintenance page for what we can help with between replacements.

What about the factories around Pinetown and South Durban?


Pinetown's industrial areas and the South Durban basin both host manufacturers with very different tyre demands. Our Pinetown page and South Durban page cover local delivery and on-site fitment. For larger machinery, we arrange fitment at your plant so the truck doesn't need to leave the site.

Get Ready Tyres

Ready for a quote?


Phone 031 702 6335 or 082 468 5308, or use the contact page. Tell us the truck make and model, the tyre size and what the floor is like: heat, swarf, spills, static or hygiene rules. We'll recommend a tyre and quote it. Typical forklift tyre prices run between R1,800 and R6,500 each, according to our price guide, and specialist compounds are quoted individually.

CALL 031 702 6335

Frequently Asked Questions


What tyres do factory forklifts need?

It depends on the hazard. Solid resilient tyres suit trucks that cross between shop floor and yard. Heat, chemicals, static and hygiene rules each call for a specific compound or tyre type.

They are tyres made with a compound that lets static electricity drain from the truck to the floor. Your safety officer decides whether your site needs them, and we supply the tyre once the specification is clear.

Standard tyres often harden and crack in high heat. Heat-resistant compounds help, along with sensible load and speed limits. Send us photos of the damage and we'll advise on options.

It depends on the chemical, because rubber compounds react differently. Give us the product names or safety data sheets and we'll check the compound against them.

Many do. Non-marking tyres leave no dark streaks on light floors and are commonly specified by food, beverage and pharmaceutical sites. They suit smooth, lighter-duty floors.

Scroll to Top