Forklift Tyres for Warehouses and Distribution Centres

Forklift tyres for warehouses should usually be cushion (press-on) tyres on electric trucks working smooth concrete, solid resilient tyres on gas or diesel trucks that cross between the floor and a yard and non-marking versions wherever floors must stay clean. The right choice depends on the truck, the floor and the number of hours it runs. Get it wrong and you'll see chunking, flat spots, scuffed floors and a truck sitting in the workshop.


Fork N Tire supplies all three types from Pinetown and delivers to warehouses and distribution centres across KwaZulu-Natal. This page explains how to choose, what to check and how to work out the real cost.


What tyres should a warehouse forklift use?


The tyre follows the duty, not the postcode:

Truck type

Typical work

Tyre we usually suggest

Electric counterbalance

Indoor loading, racking, dock to floor

Reach truck

Narrow aisles, high racking

Cushion or polyurethane, depending on the floor

Gas or diesel counterbalance

Warehouse and yard, ramps, dock plates

Any truck on a food, pharma or retail floor

Clean-floor environments

Cushion tyres are smooth, compact and kind to batteries because they roll easily. Solid resilient tyres have thicker rubber and a rim-mounted construction, so they cope with rougher surfaces and heavier work. Our comparison of solid, pneumatic and cushion tyres sets out the trade-offs in more detail.

Are cushion tyres better than solid tyres for warehouses?


Better for what? On a smooth indoor floor, cushion tyres are usually the right call. They give a smoother ride and a tighter turning circle, and they cost less per tyre.

The moment the truck leaves the building, things change. Cushion tyres wear quickly on rough ground, and they chunk if the truck turns hard on grit. A solid resilient tyre handles both worlds more comfortably. If a truck spends most of its shift inside and ten minutes a day on the yard, cushion may still be fine. If it works the yard for hours, go solid.

GET IN TOUCH

How do you stop forklift tyres marking the floor?

Use a non-marking tyre. Standard forklift tyres contain carbon black, which gives the rubber its colour and strength and also leaves dark streaks on pale floors. Non-marking tyres use a different compound, usually grey or white, and leave no mark.

There's a trade-off. The compound is generally less resistant to heat and abrasion than carbon black rubber, so non-marking tyres tend to suit clean, smooth, lighter-duty floors. Our guide to non-marking forklift tyres in South Africa explains when you actually need them.

How often should warehouse forklift tyres be replaced?


There's no fixed calendar date. Replace a tyre when it shows one of these signs:

The tread has worn down to the wear line moulded into the sidewall of a solid tyre

Chunks of rubber are missing from the tread surface

Deep cracks appear around the tyre or at the base of the rubber

Flat spots show where the truck stood under load

The truck rocks or vibrates more than it used to

Hours matter more than age. A truck running two shifts wears tyres twice as fast as one running a single shift. Our replacement guide covers each sign.

Replace tyres in pairs on the same axle, so the truck sits level and handles evenly.

How do you work out forklift tyre cost per hour?

Don't judge a tyre by the price tag. Judge it by what each hour of work costs.

Here's an illustration, not a quote. Say a set of four standard cushion tyres costs R12,000 and lasts 3,000 hours. That's R4 per hour. A cheaper set at R9,000 that lasts 1,800 hours works out at R5 per hour, and over the same 3,000 hours you'd also pay for an extra changeover and the downtime that goes with it. The cheaper tyre cost more.

Do the sum with your own numbers:

Total price of the set, fitted

Hours the truck ran before the tyres needed replacing

Divide the first by the second

Add the cost of downtime for each change if you want the full picture

Our price guide shows typical forklift tyres between R1,800 and R6,500 each, and we can quote your truck specifically.

What should a daily and weekly tyre check include?


Five minutes at the start of each shift catches many problems early:

Walk round the truck and look for missing chunks, cuts and cracking

Check for debris stuck in the tread or between twin tyres

Look for flat spots if the truck stood overnight with a load

Check that wheel nuts are present and tight

Report anything unusual before the truck goes to work

Once a week, have a supervisor or technician measure wear on each tyre, and write it down. Patterns appear. If one corner always wears faster, the cause may be the load layout or the way the truck is driven rather than the tyre itself.

This checklist doesn't replace your own safety assessment. Check it against your site rules and your forklift supplier's manual.

Why do warehouse tyres chunk and flat spot?


Chunking comes from hard cornering, sudden stops and grit on the floor. Operator habits matter as much as the tyre, so train drivers to slow down on turns. Flat spots come from a truck parked under load for a long time. Park it empty, with the forks lowered.

Heat is a quieter problem. A solid or cushion tyre warms up as it works, and a truck pushed beyond its design speed or load runs hotter than it should. If tyres show a hardened, crazed surface or crumble at the edges, heat is a likely cause.

Which tyres suit a distribution centre with a loading yard?


Most distribution centres in the Pinetown and Pietermaritzburg belts have both a polished floor and a truck yard. Solid resilient tyres are the usual answer for trucks that cross between the two. Where the yard is broken or littered, a foam-filled pneumatic tyre may be the better choice.

If you run a mixed fleet, buy by truck and duty, not by warehouse. A reach truck in an aisle and a diesel counterbalance on the dock don't want the same tyre.

Get Ready Tyres

What does it cost to get tyres delivered to south Durban?


The tyre price depends on type and size. Our price guide shows typical forklift tyres between R1,800 and R6,500 each. Stock items normally reach the Durban area within 24 to 48 hours. We'll show any delivery or fitment cost on your quote so there are no surprises later.

Ready for a quote?


Call 031 702 6335 or 082 468 5308, or send your truck details through the contact page. Include the truck make and model, the tyre size and a short description of the floor. We deliver stock items across the Durban area within 24 to 48 hours and arrange on-site fitment for larger machinery.

CALL 031 702 6335

Frequently Asked Questions


What tyres should a warehouse forklift use?

Electric trucks on smooth concrete usually run cushion or press-on tyres. Gas or diesel trucks that also work the yard usually run solid resilient tyres. Clean-floor environments call for non-marking tyres.

On smooth indoor floors, cushion tyres usually suit best because they ride smoothly and cost less. If the truck spends much of its shift outdoors, solid resilient tyres are the safer option.

Fit non-marking tyres. They are made without carbon black, so they leave no dark streaks. They suit clean, smooth floors and lighter duty, and they are generally less heat and abrasion resistant than standard tyres.

When the tyre reaches its wear line, loses chunks, cracks deeply or develops flat spots. Operating hours matter more than age, so a two shift truck needs tyres sooner than a single shift one.

Divide the fitted price of the tyre set by the hours it ran before replacement. Add the cost of downtime for each changeover if you want the complete picture.

Scroll to Top